Belkin F1D104 manual Daisy-chaining OmniView SE units with an OmniView PRO

Daisy-Chained Operation (continued)

Daisy-chaining OmniView SE units with an OmniView™ PRO

Bank 0 (Master)

1 2 3 4 5 6 7 8

Bank 1 (slave) 9 10 11 12

CONSOLE

Keyboard, mouse

and monitor

Bank 2 (slave)

Bank 3 (slave)

13 14

15 16 17 18

The OmniView™ SE is designed to be able to cascade with the OmniView™ PRO as well. In such a scenario, it is recommended that the OmniView™ PRO be the MASTER unit, and the OmniView™ SE units be slave units. This is shown in the diagram above. The OmniView™ PRO is an 8-Port, 19" (48.3cm) rackmountable OmniView™, having the same features as the OmniView™ SE, but adding On-Screen Display. When the OmniView™ PRO is used as MASTER, all of the other OmniView™ units in the chain will benefit from the On-Screen Display of the MASTER OmniView™ PRO.

When the OmniView™ PRO is used as the MASTER unit, 15 more OmniView™ units (SE and/or PRO) can be daisy-chained to the master. Only BANKs 1 to 3 can be used by OmniView™ SE units. BANKs 4 to 15 must be used by PRO units.

Daisy-Chaining the OmniView™ SE:

9