Belkin F1DS102P Computer boots up fine, but the mouse does not work, USB F1DS102T, F1DS104T only

Models: F1DS102P

1 20
Download 20 pages 43.69 Kb
Page 19
Image 19

P73778-C-SOHO-man-9_02.qxd 9/18/02 5:17 PM Page 34

TROUBLESHOOTING

The mouse is not detected at boot up.

• Check the cables and make sure that they are inserted properly.

The computer boots up fine, but the mouse does not work.

Make sure it is plugged in properly.

Make sure the mouse works when directly plugged into the computer. Rebooting may be necessary when trying this.

Try a different mouse.

When I switch from one port to another, mouse movement is completely erratic.

Make sure you do not have more than one mouse driver installed.

Make sure that the driver is either for a standard PS/2 mouse or a PS/2 mouse compatible with Microsoft.

Make sure you do not have any mouse drivers loaded in your “CONFIG.SYS” or “AUTOEXEC.BAT” files.

Avoid moving the mouse or pressing the mouse button when switching ports on the KVM Switch.

You can reset the mouse and resume proper mouse movement simply by unplugging the mouse from the front of the KVM Switch for about 2–3 seconds, and then plugging it in again.

TROUBLESHOOTING

GENERAL

My computer does not boot when connected to the KVM Switch and works fine when I connect the keyboard, video, and mouse directly to it.

Make sure that the keyboard and mouse cables are connected tightly between the KVM Switch and the computer.

Check that the keyboard and mouse cables are not crossed.

USB – (F1DS102T, F1DS104T) only

I am connecting my computer to the USB SOHO Series KVM Switch via USB and my keyboard and mouse do not work.

Prior to connecting the USB SOHO Series KVM Switch, make sure that the HID USB driver is installed on each computer. (To install the HID USB driver, connect a USB mouse and USB keyboard to the computer. Windows should automatically install the drivers.)

Some of the keys on my keyboard are not functioning properly when I use a Mac computer.

Because you are using a PC keyboard on a Mac computer, a few of the option keys on your PC keyboard may be reversed. All major keys will function as labeled.

AUDIO AND MICROPHONE

I have connected the speakers to the KVM Switch and I am not getting any sound from my computer.

Check that the sound is enabled on the computer by going into the system setting.

Check that the volume is turned up in your sound configuration.

Make sure that the audio cable is connected properly and connected to the appropriate connector.

Check that the speakers you are using are functioning properly.

34

35

Page 19
Image 19
Belkin F1DS102P user manual Computer boots up fine, but the mouse does not work, USB F1DS102T, F1DS104T only