6
ASSIGNING PRE-INSTALLED PRINTERS TO
THE BELKIN AutoSwitch VIRTUAL PORTS
•If you are trying to add your printers to Windows® and it is not listed in the default Add Printer Wizard, you will have to use the software that came with your printer to install the printer. Follow the instructions that came with your printer, then REBOOT your computer.
•If your printers are already installed in Windows®, all you have to do is to change the port assignment from LPT1 (or any other LPT port) to the virtual autoswitch ports.
Example:
You installed a DeskJet and LaserJet in Windows®. The DeskJet is connected to Port A of the AutoSwitch, and the LaserJet is connected to Port B of the AutoSwitch, as shown in the diagram on the right.
DeskJet
1.Click on START, SETTINGS, PRINTERS, and
2.Click on the DETAILS tab above. You will see the Window on the right.
Click on this
3.Repeat procedure from #1 above, and do the same for the second printer. Our example has the LaserJet on Port B on the AutoSwitch, so the port that it will connect to in the PROPERTIES will be AUTOLPTB.
C
AB F1U109
LaserJet
