Installing and Setting Up the Card
Step 3 Let Windows Finish the Installation
3.1After powering on your computer, you will see a “Found New Hardware Wizard” screen. Select “Install the software automatically (Recommended)” and click “Next”.
Note: Specific screens differ depending upon which version of the Windows OS you are using.
3.2Depending on the version of Windows you are using, you might also see a screen similar to this one. This DOES NOT mean there is a problem as the drivers have been fully tested and are compatible with this Windows operating system. Select “Continue Anyway” and follow the
1
2
3
4
5
6
section
13
