Belkin F5D9630UK4A user manual C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key

Troubleshooting

and 0-9. For 128-bit WEP, you need to enter 26 hex characters. For example:

C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key

6.Click “Apply Changes” to finish. Encryption in the Wireless Router is now set. Each of your computers on your wireless network will now need to be configured with the same security settings.

WARNING: If you are configuring the Wireless Router or Access Point from a computer with a wireless client, you will need to ensure that security is turned on for this wireless client. If this is not done, you will lose your wireless connection.

Note to Mac users: Original Apple AirPort® products support

64-bit encryption only. Apple AirPort 2 products can support

64-bit or 128-bit encryption. Please check your Apple AirPort product to see which version you are using. If you cannot configure your network with 128-bit encryption, try 64-bit encryption.

Problem:

I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Wireless Card.

Solution:

The Wireless Card must use the same key as the Wireless Router or access point. For instance, if your Wireless Router or access point uses the key 00112233445566778899AABBCC, then the Wireless Card must be set to the exact same key.

1.Double-click the “Signal Indicator” icon to bring up the Wireless “Network” screen.

2.The “Advanced” button will allow you to view and configure more options of the Card.

3.Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card.

4.Under the “Wireless Network Properties” tab, select a network name from the “Available networks” list and click the “Properties” button.

5.Under “Data Encryption” select “WEP”.

1

2

3

4

5

6

7

8

9

10

section

69