Manually Configuring your Router

Setting your ISP Connection to Static IP (IPoA)

This connection type is also called “Classical IP over ATM” or “CLIP”, which your ISP provides a fixed IP for your Router to connect to the Internet.

(1)

(2)

(3)

(4)

(5)

1.WAN IP Address – Enter an IP address assigned by your ISP for the Router WAN interface.

2.WAN Subnet Mask - Enter a subnet mask assigned by your ISP.

3.Default Route - Enter a default gateway IP address. If the Router cannot find the destination address within its local network, it will forward the packets to the default gateway assigned by your ISP.

4.VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. These identifiers are assigned by your ISP.

5.Encapsulation - Select LLC or VC MUX your ISP uses.

32

Page 34
Image 34
Belkin F5D9630UK4A user manual Setting your ISP Connection to Static IP IPoA