Chapter 4 - Designing the User Experience
Changing System Appearance
Different user interface color schemes are available, allowing you to coordinate the system interface with the room décor.
To change the color scheme:
1.Go to System > Admin Settings > General Settings > System Settings >
Appearance.
2.Configure these settings:
Setting | Description |
|
|
Color Scheme | Customizes the look of your system with different color schemes. |
|
|
Screen Saver Wait | Specifies how long the system remains awake during periods of |
Time | inactivity. The default is 3 minutes. |
|
|
You can allow users to change color schemes by allowing user access to the User Settings screen.
Setting Ring Tones and Alert Tones
To set ring tones and alert tones:
1.Go to System > Admin Settings > Audio.
2.Select a tone, as desired.
To set the V500 system’s internal ringer:
1.Go to System > Admin Settings > Audio.
2.Select Enable Internal Ringer to specify an additional ring tone when receiving an incoming call.
The ringer is built into the system and will alert you to incoming calls even if the TV monitor connected to the system is powered off.
© Polycom, Inc. | 4 - 21 |
