Chapter 4 - Designing the User Experience
Adjusting the Monitor’s Color Balance
In most cases, the monitor you connect to your system provides natural color without any adjustment. Depending on your environment as well as the model of monitor, however, the video may exhibit one of these problems:
❑Picture is too dark
❑Colors appear faded
❑Picture has too much of one color — for example, the picture may appear greenish
If you notice any of these, the monitor needs to be adjusted.
To adjust the monitor for natural color:
1.Go to System > Diagnostics > Video.
2.Select the Color Bars icon to display the color bar test screen.
3.Adjust the color using the monitor’s controls for color, contrast, and brightness. Your monitor may also have controls for tint and temperature.
4.When the colors look right on the test screen, press the 
Near button on the remote control to stop the Color Bars test and show video of the room.
5.If the color appears natural, you do not need to make further adjustments. If the color still needs adjustment, use the monitor’s controls to make small adjustments until the picture appears natural.
Designing Audio Behaviors
This section describes how to configure the audio behaviors of the V500 system, including:
❑General Audio Settings
❑Volume on an External Audio System
© Polycom, Inc. | 4 - 9 |
