Administrator’s Guide for the V500 System
Code | Cause | Definition |
|
|
|
65 | Bearer capability not | The network is not capable of providing the bearer |
| implemented | capability requested by the user. |
|
|
|
66 | Channel type not | The requested channel type is not supported by the |
| implemented | equipment sending this code. |
|
|
|
69 | Requested facility | The remote equipment is not capable of providing the |
| not implemented | requested supplementary service. |
|
|
|
70 | Only restricted digital | The network is unable to provide unrestricted digital |
| information bearer is | information over bearer capability. |
| available |
|
|
|
|
79 | Service or option not | The network or remote equipment is unable to provided |
| available, | the requested service option for an unspecified reason. |
| unspecified | This might be a subscription problem. |
|
|
|
81 | Invalid call reference | The remote equipment received a call with a call |
| value | reference that is not currently in use on the |
|
| |
|
|
|
82 | Identified channel | The receiving equipment is requested to use a channel |
| does not exist | that is not activated on the interface for calls. |
|
|
|
83 | A suspended call | The network received a call resume request that |
| exists but this call | contained a call identity information element that does |
| identity does not | not match any suspended call. |
|
|
|
84 | Call identity in use | The network received a call suspend request that |
|
| contained a call identity information element for a call |
|
| that is already suspended. |
|
|
|
85 | No call suspended | The network received a call resume request when there |
|
| was not a suspended call pending. This might be a |
|
| transient error that will be resolved by successive call |
|
| retries. |
|
|
|
86 | Call having | The network received a call resume request containing |
| requested call | a call identity information element for a call that was |
| identity has been | cleared while suspended, either by timeout or by the |
| cleared | remote user. |
|
|
|
88 | Incompatible | Indicates that an attempt was made to connect to |
| destination | |
|
|
|
91 | Invalid transit | The ISDN exchange was asked to route the call through |
| network specified | an unrecognized intermediate network. |
|
|
|
95 | Invalid message, | An invalid message was received, for an unknown |
| unspecified | reason. This is usually due to a |
|
| error occurs systematically, report it to your ISDN |
|
| service provider. |
|
|
|
96 | Mandatory | The equipment received a message that did not include |
| information element | one of the mandatory information elements. This is |
| is missing | usually due to a |
|
| systematically, report it to your ISDN service provider. |
|
|
|
Appendix - 6 | www.polycom.com/videodocumentation |