Making the Settings

Mounting the TD-6V to the Stand

1 Attach the stand holder (included with the optional drum stand) to the

TD-6V.

• When turning the unit

Using the screws attached to the bottom panel, attach the holder so the unit

upside-down, get a

bunch of newspapers or

is oriented as shown in the diagram.

magazines, and place

 

them under the four

 

corners or at both ends

Use the 8 mm screws (M5 x 8) provided with the TD-6V. Use of other

to prevent damage to

the buttons and controls.

screws may result in damage to the unit.

Also, you should try to

fig.P-009.e

orient the unit so no

 

buttons or controls get

 

damaged.

 

• When turning the unit

 

upside-down, handle

 

with care to avoid

 

dropping it, or allowing

 

it to fall or tip over.

Setup Guide

2

Narrow

Wide

Attach the TD-6V and stand holder to the drum stand (such as the

optional MDS-3C, MDS-8C, or MDS-20).

For details on assembling the drum stand and attaching the TD-6V, refer to the owner’s manual for the drum stand.

To attach the TD-6V to a

cymbal stand or other such

stand, you may want to

use the optional APC-33

All Purpose Clamp to

secure the stand holder. It

can be attached to a pipe of

10.5 mm–30 mm radius.

19

Page 19
Image 19
Roland owner manual Making the Settings, Mounting the TD-6V to the Stand