Chapter 4 Setting the Metronome (Click Edit)

Setting the Time Signature (Time Signature)

Specify the time signature of the click sound.When the numerator is set to “0,” no accent is added to the first beat. The metronome click sound then plays at a fixed volume.

It is not possible to change the time signature of the metronome clicks while a song is playing back. The metronome clicks corresponds to the time signature of the song.

Time Sig (Time Signature): 0–13/2, 0–13/4, 0–13/8, 0–13/16

Setting the Interval (Interval)

Setting How the Sound Plays (Interval).

Interval:

1/2 (half note), 3/8 (dotted quarter note), 1/4 (quarter note), 1/8 (eighth note), 1/12 (12th note), 1/16 (16th note)

Selecting the Click Sound (Inst)

You can choose the sound for the metronome click. When the

parameter is set to “VOICE,” the click is sound becomes a

human voice.

Inst:

VOICE, CLICK, BEEP, METRONOME, CLAVES, WOOD BLOCK, STICKS, CROSS STICK, TRIANGLE, COWBELL, CONGA, TALKING DRM, MARACAS, CABASA, CUICA, AGOGO, TAMBOURINE, SNAPS, 909 SNARE, 808 COWBELL

Stereo Position (Pan)

You can localize the metronome click within the stereo sound field.

The effect set here is applied only when connected in stereo.

Pan: L15–Center–R15

L15: Sound is positioned at the extreme left.

CENTER: Positions the sound in the center.

R15: Sound is positioned at the extreme right.

Inserting a Count Before Playback or Recording (Play Count In, Rec Count In)

You can have a count sound (click) inserted before recording or playback of a song begins.

PlyCountIn (Play Count In):

OFF, 1MEAS, 2MEAS

RecCountIn (Rec Count In):

OFF, 1MEAS, 2MEAS

OFF:

Playback/recording will begin without a count-in.

1MEAS:

Playback/recording begins after a 1-measure count-in.

2MEAS:

Playback/recording begins after a 2-measure count-in.

80

Page 80
Image 80
Roland TD-6V Setting the Time Signature Time Signature, Setting the Interval Interval, Selecting the Click Sound Inst