Roland TD-6V owner manual Equalizer Settings Equalizer, Settings for Various Functions Control

Chapter 1 Creating Your Own Drum Kit (Kit Edit)

Equalizer Settings (EQUALIZER)

A two-band equalizer (for high and low frequency ranges) is used to adjust the sound of each drum kit.

An equalizer lets you boost or cut specified frequency ranges to adjust the tone. You can make separate settings for the amount of boost or cut (the gain) in the high-frequency and low-frequency ranges.

1.Confirm that [CLICK] is not lit.

If this lights, press [CLICK] to extinguish it.

2.Press [KIT], then [EDIT].

[KIT] and [EDIT] light.

3.Press [ ] to select “EQUALIZER.”

4.Press [ENTER ].

5.Press [ ] or [ ] to select the parameter you wish to edit.

Parameter to set

6.Press [+] or [-] to make the setting.

Value

7.When you finish making settings, press [KIT] to end the procedure.

Switching the Equalizer On/Off (Master Equalizer Switch)

Switches the equalizer on and off.

Master EQ Sw (Master Equalizer Switch):

OFF, ON

Adjusting the Sound (High Gain, Low Gain)

Set the amount of boost or cut (GAIN) in the high frequencies (HIGH) and low frequencies (LOW). Raise to boost the sound, lower to cut. The equalizer has no effect when “GAIN” is set to “0.”

High Gain: -12dB–+12dB

Low Gain: -12dB–+12dB

Settings for Various Functions (CONTROL)

These are settings for a variety of different features, such as one that lets you start a song by striking a pad (Pad Pattern function; p. 63) and a function whereby you can use the hi-hat control pedal to control instrument pitches (Pitch Control; p. 64), along with MIDI Note Number and MIDI Gate Time settings.

1.Confirm that [CLICK] is not lit.

If this lights, press [CLICK] to extinguish it.

2.Press [KIT], then [EDIT].

[KIT] and [EDIT] light.

3.Press [ ] to select “CONTROL.”

4.Press [ENTER ].

5.Press [ ] or [ ] to select the parameter you wish to edit.

Parameter to set

62