Roland owner manual Notation Used in the Screen, Helpful Edit Functions, Choosing on the TD-6V

Chapter 1 Creating Your Own Drum Kit (Kit Edit)

Choosing on the TD-6V

1.Press [KIT], then [EDIT].

[KIT] and [EDIT] light.

2.Press [ENTER ].

The instrument selection screen appears.

3.Hold down [SHIFT] and press [ ] or [ ] to select the trigger input number for the pad being set.

The trigger input number being selected for the set pad is indicated in the upper right of the screen.

The trigger input numbers are shown in the following sequence.

H01 ➝ H02 ➝ R02 ➝ H03 ➝ R03 ➝ H04 ➝ R04 ➝ H05 ➝ H06 ➝ H07 ➝ H08 ➝ H09 ➝ R09 ➝ H10 ➝ R10 ➝ H11 ➝ R11

Selecting the Trigger Input Number

•Settings screens for trigger inputs to which no pad is connected and for rim trigger inputs for which the connected pads are not capable of producing rim sounds are also displayed.

•Trigger Inputs 6 (AUX) and 8 (TOM4) can be used only when two pads are connected to Trigger Input jacks 5/6 (TOM2/AUX) and 7/8 (TOM3/4) (p. 21). In this case, you cannot use Trigger Inputs 5 (TOM2) and 7 (TOM3). Only the numbers for the trigger inputs being used, i.e., either R05 or H06, and R07 or H08, are indicated.

Notation Used in the Screen

Trigger input numbers and names are indicated in instrument

settings screens.

Screen	Name	Screen	Name
KIK	KICK	T3	TOM3
SNR	SNARE	T4	TOM4
HH	HI-HAT	CR1	CRASH1
T1	TOM1	CR2	CRASH2
T2	TOM2	RD	RIDE
AUX	AUX

Helpful Edit Functions

Listening to an INST (Instrument) assigned to a Pad (Preview)

Even when no pad is connected to the TD-6V, you can select trigger input numbers and make settings while checking out instrument sounds.

The preview velocity is set in “Preview Velo (Preview Velocity)” (SETUP/UTILITY/Preview Velo; p. 78).

1.Hold down [SHIFT] and press [ ] or [ ] to select the trigger input number.

The trigger input number for the selected pad is indicated in the upper right of the screen.

2.While holding down [SHIFT], press [KIT]

You can preview instruments.

56