Roland TD-6V owner manual Adjusting the Song Volume, Muting a Selected Part, Part Mute

Chapter 5 Editing Songs (SONG Edit)

		3.	Press [ ].
Even when “9 Perc Only” or “10 Special” is selected for the			The screen for setting the volume of the percussion part
			appears.
percussion set, the buttons still light up according to the note
numbers.
• The correspondence between the lighted buttons and		4.	Press [+] or [-] to make the setting.
	note numbers is predetermined and cannot be changed.	5.	When you finish making settings, press [SONG]
• This function cannot be used with songs in which drum			to end the procedure.
	performances are recorded to the drum kit part.

1.Select the song to be played back (p. 83).

2.Hold down [SHIFT] and press [PLAY ].

Playback of the song begins, and the buttons corresponding to the performance of the percussion part

drums light up. BackingLevel (Backing Level): 0–127

3.To stop the playback, press [STOP ].

Adjusting the Song Volume
You can adjust the volume of the song in the backing parts
(Parts 1–4) and the percussion part.	PercPrtLevel (Percussion Part Level): 0–127
Raising the value will increase the volume. With a setting of
“0,” no sound is produced.	Muting a Selected Part
	(Part Mute)

This volume setting is applied to all songs.

	Each time [PART MUTE] is pressed the mute is alternately
	turned on or off. [PART MUTE] lights when the mute is on.
	At the factory settings, only percussion part drum tones are
• Although drum performances in the Preset songs are
	muted.
recorded to the “percussion part,” when you create your
own songs, what you play on the pads is recorded to the	Muted	Not muted
“drum kit part.” The volume level of the drum kit part is
adjusted in the “MasterVolume” (Master Volume) (KIT/
COMMON/MasterVolume; p. 66).
• Adjust the volume level of each part to correct the
volume balance among the parts (SONG/PART/Level; p.	Lit	Unlit
88).

1. While holding down [SHIFT], press [SONG].

The screen for setting the volume of the backing parts

The part to be muted here is selected in “Mute” (SETUP/

appears.

UTILITY/Mute; p. 77). Hold down [SHIFT] and press [PART

MUTE] to jump to the settings screen.

2.Press [+] or [-] to make the setting.

Settings for muted parts are applied to all songs.

84