Roland TD-6V No sounds from pads connected to Trigger Inputs 6 AUX TOM4, TOM3 not changing, 111

	Troubleshooting
No sounds from pads connected to
Trigger Inputs 6 (AUX) and 8
(TOM4)	Precautions When Turning On the Power
	When the TD-6V is turned on, it carries out a check of the
Have you made correct trigger settings?	pads. If you strike a pad or press the pedal anytime during
	this process, the pads cannot be checked properly,
(SETUP/TRIG TYPE; p. 69)
	resulting in incorrect functioning of the pads.
➝ Change the settings if you are connecting two pads to
Trigger Inputs 5/6 (TOM2/AUX) and 7/8 (TOM3/4).	Volume levels for the rims of TOM2
	and TOM3 not changing
Cannot Make Cross Sticks/	Have you made the appropriate settings for
Cross Sticks Not Sounding
	AUX or TOM4?
Do you have a pad connected to a trigger	(SETUP/TRIG TYPE; p. 69)
input that is capable of handling cross sticks?	➝ To use the TOM2 and TOM3 rims, set the AUX and TOM4
(p. 33)	trigger types to "Rim."
➝ When using the PD-80R, PD-85, PD-105, PD-120 or PD-125
to play cross sticks, connect to Trigger Input 2 (SNARE).	No Sound When [SHIFT] + [KIT]
Has the instrument that can be used for	(Preview) Is Pressed
playing the cross sticks been selected?	Is the [PREVIEW] button velocity set to “0?”
(KIT/INST; p. 58, Drum Instrument List; p. 120)
	(SETUP/UTILITY/Preview Velo; p. 78)
➝ Use the instrument with the “XS.”	➝ Press [+] or [-] to make the setting.
Are you playing the cross stick correctly?
(p. 36)	No Click/Metronome Sound
➝ For cross stick, make sure your hand or stick does not	Does [CLICK] light? (p. 79)
touch or strike the head.
	➝ Press [CLICK] to light the button.
No Sound When the Pad is Struck	Is the click volume level set to “0?”
Softly	(CLICK/Click Level; p. 79)
Did you strike a pad or press the pedal at any	➝ Press [+] or [-] to make the setting.
time from when the TD-6V’s power was
turned on until the kit name appeared in the	Song Does Not Play
display?
➝ Using the procedure of p. 23, turn the power on once again	Is GM Mode set to “ON?”
	(SETUP/MIDI COMMON/GM Mode; p. 99)
without playing any pads or pedals during the TD-6V’s
warm up.	➝ Press [+] or [-] to set this to “OFF.” The sequencer does not
	function when the TD-6V is in GM mode.

Appendices

111