Roland owner manual Problems Operating the TD-6V, Display Is Too Light Or Too Dark

Troubleshooting

Problems Operating the TD-6V

Striking Pads Does Not Switch the Settings Screen

Is the pad’s settings screen locked? (SETUP/MIDI COMMON/Note Chase; p. 57, p. 97)

➝Press [+] to set this to “ON.”

You can press [SHIFT] + [ ] or [ ] to switch to other pads’ settings screens.

Song Screen Not Displayed

Is GM Mode set to “ON?”

(SETUP/MIDI COMMON/GM Mode; p. 99)

➝Press [-] to set this to “OFF.” The sequencer does not function when the TD-6V is in GM mode.

Cannot Record or Edit User Song

Is Song Lock set to “ON?” (SONG/COMMON/Song Lock; p. 86)

➝Press [-] to set this to “OFF.”

Cannot Carry Out Bulk Dump

Is the MIDI connector used to connect the MIDI cable correct? (p. 95)

➝If you wish to save a bulk dump on an external device, connect the TD-6V’s MIDI OUT/THRU connector to the external sequencer’s MIDI IN connector.

Could the external MIDI device be set in such a way as to cause it to decline the reception of MIDI Exclusive messages?

➝Refer to the owner’s manual for the external MIDI device, then set it so that the reception of System Exclusive data is enabled.

System exclusive data is data unique to individual devices, so verify all settings.

Display Is Too Light Or Too Dark

Is the display contrast properly adjusted? (SETUP/UTILITY/LCD Contrast; p. 76)

➝Press [+] or [-] to make the setting.

The visibility of the display will change depending on the viewing angle and on room lighting conditions. The visibility of the display will change depending on the viewing angle and on room lighting conditions.

Appendices

115