Status Monitor
Media Setting tab
The Media Setting tab shows:
•The type of Ink ribbon in the printer, the lot number of the ribbon, and the number of panel sets included in the ribbon. The printer provides this information and it cannot be changed. If the printer cannot recognize the type of ink ribbon, one of the following reasons is displayed:
Display | Reasons for ink recognition error and the solutions |
|
|
|
|
252: Invalid TAG Data | The data for the ink ribbon is incorrect. Replace the ink ribbon and try again. |
|
|
253: Defective TAG | The printer did not recognize the print ribbon data. Replace the ink ribbon and |
| try again. |
|
|
254: No TAG | The printer could not read the print ribbon data. Make sure the ink ribbon has |
| been loaded correctly. See “Load ink ribbon” on page 9. |
|
|
255: Defective R/W | The printer is defective. The printer must be repaired. |
|
|
•Settings to view or change the type and thickness of cards being used.
—For Material, choose
—For Thickness, choose:
—Standard for cards 0.76mm (0.030in) thick
—Thin for cards 0.25mm (0.010in) thick
•A setting to view or change the type of Retransfer (INTM) film.
Tips for success
•Make sample cards to verify settings before using cards of a different thickness.
•Print on one side of thin cards. Do not print on both sides.
RP90 Plus E and RL90 User Guide | 29 |
