Prepare to print cards
Initialize the retransfer film
Tips – Retransfer film
•To avoid dirt and dust particles that might adhere to the film during loading, (move) initialize the retransfer film one or two panels each time the film cartridge is removed from the printer.
1Press the RESET key on the control panel.
2The LCD display reads "Initialize OK?"
3Use the up and down arrow keys to select "2'nd Panel, OK?" or "Next Panel, OK?"
—Press the ENTER key when "Initialize, OK?" is displayed to initialize the printer without winding the film.
—Press the ENTER key when "2'nd panel, OK?" is displayed and the printer winds the retransfer film two panels.
—Press the ENTER key when "Next Panel, OK?" is displayed and the printer winds the film one panel.
Initialize the patch or topcoat material (optional RL90 laminator only)
You must initialize the laminate material each time it is changed.
To initialize the laminate, press RESET/K and then the ENTER key on the laminator LCD panel.
RP90 Plus E and RL90 User Guide | 17 |
