Using the LCD menus
Press the MENU key and "User Mode" is displayed on the LCD panel. The LCD panel changes to read "Display" within 0.5 seconds.
Press the ENTER key when "Display" is shown to access display settings which include the card counter, LCD contrast, and LCD background color.
Press the MENU key when “Ready” is displayed to access other printer settings.
Press the EXIT key at any time to exit the menu system and return to "Ready" status.
Speaker
Provides an electronic beep that indicates:
•An error has happened.
•Fewer than 20 cards remain in the card hopper.
•Confirms that settings have been saved.
The speaker function can be turned on or off using the LCD panel.
Using the Printer LCD panel
Many printer settings can be changed using the Status Monitor. See “Status Monitor” on
page 25.
Menu Display | Settings | Function | |
|
|
| |
Display | Counter | Use the up and down arrow keys to select the card counter type: | |
| • | Total | • Total is the default setting, and displays the number of |
| • | Head | cards printed. The Total counter cannot be reset. |
| • Head displays the number of complete dye panels. The | ||
| • | Free | |
| Head counter cannot be reset, however, it automatically | ||
|
|
| resets itself when the print head is replaced. |
|
|
| • The Free counter displays the number of cards that have |
|
|
| printed. The Free counter can be reset by the user. |
|
|
| |
| Contrast | Set the LCD panel contrast using 7 gradations from | |
| 0 |
| |
|
|
| |
| Back Color | Choose from eight LCD background colors. Sky blue is the | |
| SKY BLUE | default color. Other selections are blue, light blue, green, | |
|
|
| bright green, yellow, purple, and pink. |
|
|
|
|
Counter Reset | OK? |
| Press ENTER to reset the Free counter. |
|
|
|
|
Cleaning | Rollers |
| Start the cleaning function to clean the card feed rollers and |
| OK? | heated rollers, and to clean the magnetic head when using | |
| Magnetic Stripe (MG) | magnetic stripe cards. See “Cleaning the card feed rollers | |
| Head | and heat roller” on page 45 or “Cleaning the magnetic | |
|
|
| head” on page 46 for the steps to follow. |
|
|
|
|
36 | RP90 Plus E and RL90 User Guide |
