Prepare to print cards
Prepare to print cards
Initialize the ink ribbon
Tips – Ink ribbon
•To avoid dirt and dust particles that might adhere to the ink ribbon during loading, move (initialize) the ink ribbon one or two panels each time the ink cartridge is removed from the printer.
1Press the RESET key on the control panel.
2The LCD display reads "Initialize OK?"
3Use the up and down arrow keys to select "2'nd Panel, OK?" or "Next Panel, OK?"
—Press the ENTER key when "Initialize OK?" is displayed to initialize the printer without winding the ribbon.
—Press the ENTER key when "2'nd panel, OK" is displayed and the printer winds the ribbon two panel sets.
—Press the ENTER key when "Next Panel, OK?" is displayed and the printer winds the ribbon one panel set.
Set the retransfer film type
Tips – Retransfer film
•Set the retransfer film type when you set up the printer.
•If you change the type of film, set the type of retransfer film you are using.
1Press the MENU key until "Retransfer" is displayed.
2Press the ENTER key.
3"Media Type" is displayed.
4Use the up and down arrow keys to select Std (1000/roll). Selections of 250 and 750 are not available at this time.
5Press the ENTER key.
6Press EXIT twice to return to the "Ready" display.
16 | RP90 Plus E and RL90 User Guide |
