Site guidelines
Tips – Site selection
•Avoid locating the equipment in dirty or dusty environments.
•Do not place in areas susceptible to strong vibration or shock.
•Do not place the printer, optional laminator, or the supplies in direct sunlight.
When choosing a site for the printer and its supplies, consider these guidelines:
•Keep all dust, dirt, food, liquids, etc. away from the printer at all times.
•Do not use supplies or cards that have been dropped on the floor or have otherwise become contaminated.
•Keep paper and foreign materials off the printer.
•Place the printer on a stable platform; keep it off the floor.
•Place the printer away from direct sunlight.
•Place the printer away from heating ducts, blowers, or other air vents.
•Do not use the printer for purposes other than its intended use.
•When cleaning around the printer, prevent debris from entering the printer.
•Place the printer in a clean office environment, protected from any type of construction.
•Store all supplies in the original packaging until you load them in the printer. Keep the original packaging closed.
•Store all supplies in a clean, cool, and dry location.
Operating environment
The performance of the printer and optional laminator is strongly influenced by the installation location. Using the printer in areas below the recommended temperatures can cause retransfer errors, while using the printer in areas above the recommended temperatures can cause errors such as deformation and retransfer film errors. Consider the following recommendations if you need to move or relocate your printer.
Relative humidity: 35% to 70%
Temperature: 59° F to 86° F (15° C to 30° C)
72 | RP90 Plus E and RL90 User Guide |
