Using the LCD menus
About the Laminator LCD panel
When you power on the laminator, it begins initializing. The laminator searches for laminate and then starts preheating. The laminator is ready when the LCD display reads "Ready" and the Ready light is steady green.
Ready LED (green)
Steady Green | The laminator is ready. |
Blinking | The laminator busy. |
Off | The laminator stopped because of an error, initialization or |
| preheating is in progress, or the operator is using the LCD panel to |
| set preferences. |
Error LED (red)
On | The laminator may require service or did not power on correctly. To |
| correct the condition, press the RESET/K and then the ENTER key. |
| If this does not correct the condition, power the laminator off, and |
| then back on before calling for service. |
Off | Normal status |
Keys:
MENU | Press MENU to access the laminator settings. Continue to press |
| the MENU key to access the settings in the order listed on the next |
| page. |
ENTER | Confirms your selection. |
EXIT | Exits the current selection and returns you to the previous menu |
| selection. Press the EXIT key at any time to exit the menu system |
| and return to "Ready" status. |
RESET/K | Initializes the laminator after an error occurs. Scrolls through |
| available values when you change settings. |
RP90 Plus E and RL90 User Guide | 41 |
