Datacard Group RP90, RL90 instruction

		Using the LCD menus


Menu Display	Settings	Function

	Subnet Mask	The default Subnet Mask of the printer is 255.255.255.0. If
		you do not use DHCP, ask your network administrator for the
		Subnet mask.

	Gateway	The default Gateway of the printer is 192.168.0.1. If you do
		not use DHCP, ask your network administrator for the Subnet
		mask.

	Session TimeOut	Set how many minutes to wait without using the printer to stop
	OFF or up to 60 minutes	the network session between the PC and printer.

	MAC Address	The MAC Address is unique to each printer. The MAC
		Address is displayed and cannot be changed.

	IPSec Mode	Set the Internet Protocol (IP) Security mode to ON or to OFF.
	ON	After setting up security using a PC and USB connection, this
	OFF	setting cannot be changed.

	IPSec Type	Set the type of IP Security. Choose from the following:
		• Not Setting, no IP Security.
		• Preshared, using a preshared key for encryption.
		• Certificate, using a public key certificate for encryption.
		After setting up security using a PC and USB connection, this
		setting cannot be changed.

HR Control	ON	Set whether to lower the temperature of the retransfer heat
	OFF	roller after 30 minutes of no printing. The roller returns to
		operating temperature when the next card is printed.
		Setting HR Control to ON can add to the useful life of the
		retransfer heat roller.

Download		To prepare the printer for a firmware download, press the
		ENTER key. The firmware must be downloaded from a USB-
		connected PC with the driver and Status Monitor installed.
		See “Others tab” on page 31 for the Status Monitor page.
		DO NOT power off the printer while the firmware is being
		downloaded.

Transport Mode	Set transport mode	Set the Transport Mode when moving or shipping the printer.
		Press the ENTER key to use the transport mode. “Please,
		power off” is displayed on the LCD panel. The transport mode
		is cancelled when the printer is powered back on.
		See “Preparing the printer and laminator for transport”
		on page 48 for information on preparing the printer for
		transporting it.

40	RP90 Plus E and RL90 User Guide

Image 46

Datacard Group RP90, RL90 manual See Preparing the printer and laminator for transport

Contents

User Guide Regulatory compliance Contents Messages RP90 Plus E and RL90 User Guide Safe environment SafetyLiability statement Safe human interface About this manual Introduction1Who to call for assistance About the Printer Outside of the printer Inside of the printer Back of the printer About the laminator Parts of the laminator About the laminator RP90 Plus E and RL90 User Guide Using the printer Tips Handling cards Load SuppliesLoad cards See Supplies on page 67 for specific card information Load ink ribbon Tips Handling ink ribbon Load retransfer film Tips Handling retransfer film Or topcoat material Load laminateTips Handling patch See Laminator material on Power on Check the PC connection Optional laminator connection Tips for laminator power Power on the laminatorLCD sequence on laminator startup Tips for printer power Power on the printerLCD sequence on printer startup Set the retransfer film type Prepare to print cardsInitialize the ink ribbon Tips Ink ribbon Initialize the retransfer film Print cards using ID software Printing cards Print from a PC application Tips Printing Printing cards RP90 Plus E and RL90 User Guide Viewing and changing Printer settings Setup tab Printing Preferences Encode tab Tips Card cleaning roller Printing Properties Open the Status Monitor Status MonitorTips for Success Close the Status Monitor Printer Status tab Icon Status Icon Color Meaning Printer Setting tabSee Status monitor messages on Retransfer tab Bend Remedy tab Media Setting tab Display Reasons for ink recognition error and the solutions Property tab Printer Select tab Others tab Status monitor messagesSee Hopper jam on page 52 to remove Mending broken ink ribbon or retransfer Film on See Turnover jam on page 53 to removeSee Retransfer section jam on page 54 to Correctly see Load retransfer film on Power on the printer on page 15 Ink ribbon on Initialize the ink ribbon on About the Printer LCD panel Using the LCD menusPrinter LCD panel on Magnetic stripe cards. See Cleaning the card feed rollers Using the Printer LCD panelHeat roller on page 45 or Cleaning the magnetic Menu Display Menu Display USB See Preparing the printer and laminator for transport About the Laminator LCD panel Menu Using the Laminator LCD panel Laminator on page 49 for more information Taking care of your printer Card feed roller Cleaning the printerCleaning the card cleaning rollers Load cards on Tips Cleaning card feed and heat rollers Cleaning the card feed rollers and heat rollerPower on the printer. See Power on the printer on Cleaning the magnetic head Tips -Magnetic head cleaning card Cleaning printer fan filters Cleaning the thermal headTips Thermal head Preparing the printer and laminator for transport Run a laminator cleaning card Cleaning the laminatorTips Laminator cleaning card Cleaning the laminator cartridge Laminator fan filter Messages Error recovery Printer roller layout Printer error recovery Hopper jam Turnover jam Tips Turnover jam Retransfer section jam Tips Retransfer jam Mending broken ink ribbon or retransfer film Ribbon on page 16 or Initialize the retransfer film on Tips -Bend Remedy Bend remedy printer settingsBend remedy Remedy tab on Bend remedy laminator settings To set the laminator Card Fan See Hopper jam on See Cleaning the card feed rollers and heatPrinter LCD messages See Turnover jam on Mending broken ink ribbon or retransfer film See Cleaning the card cleaning rollers on As described in Operating environment on Described in Retransfer section jam on Card jam Laminator error recoveryTips Laminator card jam Align the end of the supply material with Patch position Change the left-to-right position Laminator LCD messages LCD Message Possible Cause Solution Supplies6 Ink ribbon Ink ribbon, retransfer film, and laminator materialCards Retransfer film Card size Cleaning suppliesCard material RP90 Plus E and RL90 User Guide Site requirements Operating environment Site guidelinesTips Site selection Ventilation clearance Storage Environment for supplies Printer specifications Laminator specifications RP90 Plus E and RL90 User Guide Magnetic Stripe Encoding Inline Encoding on Character Code Table on Example Inline EncodingTip for success Character Code Table DEL Character Code Table RP90 Plus E and RL90 User Guide Compliance FCC Regulatory compliance Design and information contained in these June