Belkin F5D9630UK4A user manual Setting WPA2-Personal PSK, Setting WPA2-Enterprise Radius Settings

Manually Configuring your Router

IMPORTANT: You also need to ensure that all your wireless client cards / adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin Wireless cards have update driver available for download from the Belkin support site: www.belkin.com/networking.

Setting WPA2-Personal (PSK)

1.From the “Security Mode” drop-down menu, select “WPA/WPA2-PSK (PSK)”.

2. Select “WPA2-Personal (PSK)” for Authentication.

3.For Encryption Technique, select “AES” . This setting will have to be identical on the clients that you set up.

4.Enter your Pre-Shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up. For example, your PSK might be something like: “Smith family network key”.

5.Click “Apply Changes” to finish. You must now set all clients to match these settings.

Setting WPA2-Enterprise (RADIUS) Settings

If your network uses a radius server to distribute keys to the clients, use this setting.

1.From the “Security Mode” drop-down menu, select “WPA/WPA2— Enterprise (RADIUS)”.

2.Select “WPA2-RADIUS” for Authentication

3.For Encryption Technique, select “AES”. This setting will have to be identical on the clients that you set up

1

2

3

4

5

6

7

8

9

10

section

45