Belkin F6D3000 user manual Connecting to a Wireless Network using WPA-Radius Server or, section

Using the Belkin Wireless Network Utility

Connecting to a Wireless Network using WPA-Radius Server or 802.1x:

To enable the security settings for the Card, you must select a network from the “Available Networks” tab or a profile from the “Profiles” tab and follow steps 1-3 of “Setting up Wireless Network Profiles” on page 18 before continuing.

Step 1 – Select “WPA-Radius Server” or “802.1x” from the “Authentication Mode” drop-down box.

Step 2 – Select the settings to connect to your router (or access point) as indicated by your network administrator.

Step 3 – Click “Complete” to save the security settings and the new profile. To begin using your new profile, highlight the profile name by clicking on the name one time, then click “Connect”.

1

2

3

4

5

6

section

31