Appendix C Regulatory Information
106
DECLARATION OF CONFORMITY
per ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Company
Manufacturer’s Address: 5301 Stevens Creek Blvd.
Santa Clara, CA 95052 USA
declares, that the product
Product Name: Network Server
Model(s): LH 4 and LH 4r
Product Options: All
conforms to the followi n g Product Specifications:
Safety: IEC 950:1991 + A1+ A2 + A3 / EN 60950:1992 + A1+ A2 + A3
EMC: CISPR 22:1993 / EN 55022 (1994)
EN 50081-1:1992 - Generic Emission
EN 50082-1:1992 - Generic Immunity
IEC 801-2:1991, 4 kV CD, 8 kV AD
IEC 801-3:1984, 3V/m
IEC 801-4:1988, 0.5 kV Signal Lines, 1 kV Power Lines
FCC Title 47 CFR, Part 15
Supplementary Information:
1) The product was tested in a typical configuration with Hewlett-Packard peripherals.
2) Models were configured with a netwo rk interface board and shielded twisted-pair cable.
3) The product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
•This device may not cause harmful interference, and
•This device must accept any interference receive d, including interfere nce that may cause
undesired operation
The product herewith complies with the requirements of the following directive s and carries the CE-marking accordingly:
-EMC Directive 89/336/EEC
-Low Voltage Directive 73/23/EEC
Santa Clara, __________1998
Nigel Marrion / Quality Manag er
North American Contact:
Hewlett-Packard Company Product Regulations Manager
3000 Hanover Street
Palo Alto, CA 94304
650-857-1501
European Contact: Your local Hewlett-Packard Sales and Service Office or
Hewlett-Packard GmbH,
Department HQ-TRE
Herrenberger Straße 130
D-71034 Böblingen
(FAX: + 49-7031-143143)