Belkin LH 4, LH R Installing Additional Memory in the LH 4

Chapter 5 Installing Additional Memory
24
NOTE Use only HP DIMMs listed in HP Information Assistant or HP
Order Assistant.
Installing Additional Memory in the LH 4
1. Turn OFF the NetServer and r em ove all cables from the rear of the
NetServer. Pull both power plugs out.
2. Remove cover 3 and the bezel (see Chapter 3, "Removing and Replacing
Covers").
3. Loosen the memory cage screw, a nd swing the cover open ( see F i gure 5-
2).
Figure 5-2. Memory Cage
4. Unseat each memory board with the release clips, and remove the two
boards (see Figure 5-3).