Belkin ST4125D manual ST-4125D/ST-6125D Control BOX Installation, Phase Power Installation Input

Models: ST6125D ST4125D

1 36
Download 36 pages 48.17 Kb
Page 14
Image 14

ST-4125D/ST-6125D — CONTROL BOX INSTALLATION

DANGER - Hazardous Voltage

To place the ST-4125D/ST6125D submersible pumps into operation requires the use of a control box. The control box contains the necessary electronics (thermal overload module, float switch connections and 230/460 voltage transformer) to operate the pump. Remember this control box

contains hazardous voltages. Disconnect all sources of power before installing or servicing. There exists the possibility of electrocution, electric shock or burn, which can cause severe bodily harm or even death!

CAUTION - Installation

This control box should only be installed or serviced by a licensed electrician or qualified personnel.

CONTROL BOX MOUNTING

Mountthecontrolboxinanuprightverticalposition.Makesure the control box is securely fastened to a flat surface, that is free of dust, dirt, moisture or any elements that may contaminate or erode the electronic components of the control box.

3-Phase Power Installation (Input)

The ST-4125D/ST6125D submersible pump requires 230/ 460V 3-phase power for normal operation.The pump is shipped from the factory in the 230 VAC configuration. To change the voltagesettingfrom230 VACto460VACrefertothe230/460VAC Selection section.

If you cannot determine what your pump's power requirements are, look at the vendor supplied identification name tag attached to the pump or please contact Multiquip's Service/Technical Assistance department.

CAUTION - Voltage Phasing

Applying incorrect power (voltage phasing) to the submersible pump can cause severe damage to the pump. Please make sure that the correct voltage and phase are transferred to the pump at all times.

POWER CORD REQUIREMENTS

When routing the three phase power via a power cord to the controlbox,ALWAYSusethecorrectwiresize.Pleasereference Table 3 below (Cord Length and Wire Size) to determine the correct wire size. Incorrect wire size can adversely affect the performance of the pump.

TABLE 3. CORD LENGTH AND WIRE SIZES

AMPS

50 FT.

100 FT.

150 FT.

 

 

 

 

6

16 AWG

16 AWG

14 AWG

 

 

 

 

8

16 AWG

14 AWG

12 AWG

 

 

 

 

10

16 AWG

14 AWG

12 AWG

 

 

 

 

12

14 AWG

14 AWG

12 AWG

 

 

 

 

14

14 AWG

12 AWG

10 AWG

 

 

 

 

16

12 AWG

12 AWG

10 AWG

 

 

 

 

FLOAT SWITCH INSTALLATION

1.Remove the float switch input connector housing, then route the float switch wires through the cable gland on the control box. Attach the wires to the float switch terminal block as indicated by Table 4. Refer to Figures 7 and 8.

TABLE 4. FLOAT SWITCH CONNECTIONSS

FLOAT SWITCH

FLOAT SWITCH TERMINAL

BLOCK NUMBER

 

 

 

START

TERMINALS 1 AND 2

 

 

STOP

TERMINALS 3 AND 4

 

 

2.Tighten the connector housing to ensure a tight fit between the cord and the connector body.This will prevent the cable from pulling out of the terminal block and also prevent moisture from entering the control box.

3.Determine the length of the float switch wires, then secure float switch wires to pump discharge hose.

PAGE 14 — ST-4125D/ST-6125D SUBMERSIBLE PUMPS — OPERATION AND PARTS MANUAL — REV. #1 (06/12/08)

Page 14
Image 14
Belkin ST4125D, ST6125D manual ST-4125D/ST-6125D Control BOX Installation, Phase Power Installation Input

ST6125D, ST4125D specifications

Belkin is renowned for producing high-quality networking and connectivity solutions, and their ST4125D and ST6125D models exemplify this commitment. The ST4125D is a 4-port USB hub, while the ST6125D serves as a versatile 6-port USB hub, both designed to enhance productivity and connectivity for users, especially in environments where multiple devices are used simultaneously.

One of the main features of the Belkin ST4125D and ST6125D is their ability to expand USB connectivity effortlessly. Each hub allows users to connect multiple devices to a single USB port, which is particularly useful for laptops and desktops that have limited ports. The ST4125D features four USB 3.0 ports, while the ST6125D includes six, making them perfect for connecting printers, external hard drives, and other peripherals without having to switch devices.

Another significant technology integrated into both models is USB 3.0, which offers data transfer speeds of up to 5 Gbps. This high-speed performance not only ensures rapid file transfers but also improves efficiency when moving large volumes of data. The backward compatibility with USB 2.0 devices also ensures that users can connect older peripherals without any issues, making these hubs highly versatile.

The design of the ST4125D and ST6125D hubs promotes convenience and ease of use. Their compact and lightweight form factor makes them portable, ideal for both home and office environments. Additionally, the hubs feature individual power switches for each port, granting users control over power management and enhancing energy efficiency.

Furthermore, both models boast an LED indicator for power status, providing real-time feedback to users. They also come equipped with a sturdy build quality, ensuring longevity and durability even with regular use. With plug-and-play functionality, setting up the hubs is hassle-free, requiring no additional drivers or software installation.

In conclusion, both the Belkin ST4125D and ST6125D USB hubs present excellent solutions for anyone seeking enhanced connectivity options. With their combination of speed, functionality, and user-friendly features, they are a valuable asset in today’s increasingly device-driven world. Whether for personal use, home offices, or larger business settings, these hubs stand out as reliable tools that meet diverse connectivity needs effectively.