4 Slide the paper tray back into the printer until it clicks into place.
Note
If you cannot insert the ink ribbon cartridge completely, check whether any paper is left inside the printer. If you find a left sheet, slowly pull it straight out.
When storing the paper•Avoid storing the paper in a location subject to:
–high temperatures
–high humidity
–excessive dust
–direct sunlight
•Use the original package for storing unused paper.
Printing
Before printing•Ensure that the printer is properly connected to the computer. (See page 7.)
•Ensure that the ink ribbon cartridge and paper tray are properly loaded. (See pages 9 and 12.)
•Ensure that the printer driver has been installed. (See page 7.)
POWER indicator
PRINT indicator
ALARM indicator
RIBBON indicator
PAPER indicator
1
1 Press the POWER switch to turn the printer on. The POWER indicator lights.
PRINT, ALARM, RIBBON and PAPER indicators light at the same time, then all of them go out.
Notes
•Turn the printer on first.
•Do not turn the computer off and on while it is accessing a hard or floppy disk.
2 Turn on the power of the computer.
3 Execute the print job with software application. While the printer is receiving the image data from the computer, the PRINT indicator blinks.
While the printer is printing, the PRINT indicator lights.
Notes
•Do not pull the paper out till the printer finishes printing.•Do not turn off the power during printing. If you do so, paper may not be ejected and may jam in the printer.
•Do not open the ribbon door while the printer is printing. If you open the ribbon door, the printer stops printing. When you close the ribbon door, the sheet
Operation
Printing 13