Operation

being printed when you opened the ribbon door is ejected and the printer turns to the standby mode.

•You can make multiple copies of identical printouts. However, the printer may stop printing due to warping of the printed sheet and the ALARM indicator lights. In such a case, remove the printouts accumulated on the paper tray. The printer will start to print the remaining copies automatically.

•Do not leave more than 10 sheets of ejected printouts on the paper tray. Doing so may cause a paper jam.

If the printer does not print

The printer will fail to print when the ALARM, PAPER, and/or RIBBON indicator light.

For details, see “Indicators on the Ribbon Door” on page 18.

If the paper or ink ribbon runs out during printing

The printer stops the printing operation.

Load the paper into the paper tray and the ink ribbon. Printing of remaining copies is automatically started.

To stop the printing multiple copies of identical printouts

Press the STOP button. The printer finishes current printing and ejects it. Then, it turns in standby mode.

When storing your printouts

•Avoid storing the printout in a location subject to high temperatures, high humidity, excessive dust and direct sunlight.

•Do not stick tape on a printout. Also, avoid leaving a plastic eraser on a printout or placing a printout in contact with materials which contain plasticizer (under a desk mat, for example).

14 Printing