Belkin UP-D55 When using the printer again

4 Remove the one screw with which the back cover plate is secured, using a coin.

Miscellaneous	5 Pull the back cover plate up and remove it from the
	5 Pull the back cover plate up and remove it from the
	printer.

6 Remove the jammed paper slowly.

If you still cannot remove the paper Do not try to remove it forcibly. Contact your nearest Sony dealer.

7 Replace the back cover plate.

Note

When you put it back, be careful not to catch your fingers or any other object in the back cover plate.

8 Secure the back cover plate using the screws removed in step 4.

Confirm that the screw holes of the back side of the printer and the back cover plate match before securing them.

When using the printer again

Confirm the following before using the printer again.

•Confirm that connecting cables and the AC power cord are securely connected.

•Reset the paper tray in the printer.

20 If the Paper Jams

Contents

UP-D55 Owner's Record WARNING For the customers in Canada For the customers in the U.S.A and Canada For the customers in the U.S.A Warning on power connection Warning on power connection for medical use Table of Contents Getting Started Operation Miscellaneous Getting Started System Overview Front Panel System Configuration Rear Panel Supplied Accessories Connections USB Port Connection Installing the Printer Driver Page Operation Before Printing Loading an Ink Ribbon Cartridge Page If the ink ribbon cartridge cannot be inserted When handling the ink ribbon: When storing ink ribbon: If your ink ribbon should tear Inserting the Paper Tray Printing If the printer does not print If the paper or ink ribbon runs out during printing To stop the printing multiple copies of identical printouts When storing your printouts Miscellaneous Precaution Safety Installation Condensation Location Ink Ribbon and Paper Specifications Troubleshooting Indicators on the Ribbon Door If the Paper Jams When using the printer again Index