Preface
The EZ Melt, Fill and Filter models EZ18, EZ24, and EZ34 are designed to be used with Belshaw fryers. It performs four functions:
It melts shortening
It holds shortening
It supplies shortening to the fryer kettle
It filters used shortening for
It is not designed to perform any other functions. The EZ Melt, Fill and Filter uses electrical elements to melt shortening.
The EZ Melt moves around on casters. It is meant to be used on the floor. The operator of the EZ Melt is expected to behave safely and to read this manual and follow its instructions and warnings.
Study the instructions and warnings in this manual carefully. A thorough understanding of how to install, maintain, and safely operate the EZ Melt, Fill and Filter will prevent production delays and injuries.
To use the EZ Melt safely, heed the following warnings and all other warnings that appear in this manual:
Make sure all hose connections are tight. If you do not, you may be sprayed with hot shortening. This could result in serious burns.
Make sure no water gets into the shortening. Water causes hot shortening to spatter, which could cause serious burns.
Make sure the EZ Melt kettle has enough room in it before draining shortening from the fryer. If you do not, shortening may overflow the kettle and get on the floor, possibly causing slips, falls, injury, burns, or even death.
Make sure the nozzle of the supply hose is securely mounted on the side of the fryer before turning on the pump. If you do not, hot shortening could spray you, resulting in serious burns. Also, shortening could get on the floor, possibly causing slips, falls, injury, burns, or even death.
Make sure that the system and the shortening are cool before attempting any adjustments or repairs. If you do not, you may be burned.
Be careful never to get shortening, water, or other materials on the floor. If anything does get spilled on the floor, mop it up immediately. If you do not, someone could slip or fall, be burned or injured, or even die.
To avoid damaging the EZ Melt, never use force to assemble, disassemble, operate, clean, or maintain it.
To avoid electrocution, make sure that the power cord is not frayed or cracked and that it does not pass through any water or shortening.
Make sure that the power cord is routed so that no one will trip over it.
Belshaw Bros., Inc. 1750 22nd Ave. S. Seattle, WA 98144 Phone
EZ Melt Model EZ18, EZ24, EZ34 | v |
