BenQ DC 3400 User’s Manual
10
Setting the EV Bias (Exposure)
Set the EV bias to increase or decrease the camera lens’ exposure value. This
allows more or less light to pass through the lens. Adjusting this setting in particularly
bright or dark environments can improve the quality of the photograph. A higher EV
bias value results in a brighter photograph.
Setting Light Metering
The DC 3400 has three built-in light meter presets that you can use to optimize photo
results in various lighting conditions.
Setting the Date Imprint
You can choose to have the current date imprinted over your photos. This function
can be turned off.
See page 17 for information on setting the camera’s date.
Center Average: The camera adjusts itself based on the average light
measurement over the center region of the LCD.
Point: The camera adjusts itself based on a point light measurement at the
center of the LCD.
Average: The camera adjusts itself based on the average light measurement
over the entire region of the LCD.
1. Press and to select the EV
Bias menu.
2. Press or the Set button.
3. Press and to change the
EV bias value (from -2.0 to +2.0).
4. Press the Menu or Set
button to confirm your selection
SET
MENU SET
1. Press and to select the
light metering menu.
2. Press and to select the
meter setting.
3. Press the Menu button to
exit the menu or use and to
move on to the next setting.
MENU
Date Imprint OFFDate Imprint ON
1. Press and to select the
date imprint menu.
2. Press and to select the
date imprint setting.
3. Press the Menu button to
exit the menu or use and to
confirm move on to the next set-
ting.
MENU