BenQ DC 3400 User’s Manual
Adjusting LCD Display Brightness
By default, the DC 3400 LCD display brightness is set to “Bright”. This setting is useful when using the camera outdoors or under bright lights. To maximize battery use, however, you can set the LCD display brightness to “Normal”.
1.Enter the setup menu as described above and press 
to select the LCD Brightness 
menu icon.
2.Use 
and 
to choose between Bright 
and Normal 
.
3.Press the Menu MENU button to confirm your selection.
Setting the Video Format
Although the DC 3400’s video format is preset at the factory to suit the region of purchase, you can change the DC 3400’s video format if necessary.
This setting is important when you connect the DC 3400 to a monitor or television.
1.Enter the setup menu as described above and press
to select the Video Format 
menu icon.
2.Use 
and 
to choose between NTSC 
and PAL 
.
3.Press the Menu MENU button to confirm your selection.
Turning Power Saving Mode On or Off
Power saving mode conserves battery life by turning the LCD display off after three minutes of inactivity and turning the camera power off after five minutes.
1.Enter the setup menu as described above and press 
to select the Power Saving 
menu icon.
2.Use 
and 
to choose between On 
and Off 
.
3.Press the Menu MENU button to confirm your selection.
Restoring Default Settings
You can restore the DC 3400’s default factory settings at any time. Restoring default settings overrides any settings you have made in the past.
1.Enter the setup menu and press 
to select the Reset Default 
menu icon.
2.Press the Set SET to enter the confirmation menu. Select Yes or No and press the Menu MENU button to confirm your selection.
18
