BenQ DC 3400 User’s Manual
Formatting Memory
Formatting an inserted SD card completely erases the memory’s contents and prepares it for use. You must format an SD card if you are using it with the DC 3400 for the first time.
1.Enter the setup menu and press 
to select the Copy/Format 
menu icon.
2.To format the contents of memory, select the “Format Memory” 
icon and press the Set SET button.
3.Use 
and 
to select “Yes” or “No” and press the Set SET button to confirm your selection. Press the Menu MENU button to cancel and return to the Setup menu
Resetting File Names
All still images movie clips are given file names that follow the format
“IMG_xxxx.yyy” where “xxxx” is a number from 0001 to 9999 and “yyy” is the file format (JPG, WAV or AVI). The file number is incremented automatically by the camera. Reset this number to “0001” (or the next available number) as follows
1.Enter the setup menu and press 
to select the Reset Filename 
menu icon.
2.Press the Set SET button and use 
and 
to select “Yes” or “No”. Press the Set SET button to confirm your selection or press the Menu MENU button to can- cel and return to the Setup menu.
Setting the Date and Time
Because date and time are stored as metadata with each file recorded by the DC 3400, it is important to set this properly.
1.Enter the setup menu and press 
to select the Set Date and Time 
menu icon.
2.Press the Set SET button.
3.Use 
and 
to navigate between year, month, date, hour and minute set- ting. Press 
and 
to adjust the values for each.
4.Press the Set SET button or the Menu MENU button to confirm your changes and return to the Setup menu.
17
