Remote Control14
English
Using the Remote Control
When using the remote control, aim it at the remote control sensor window on the display. If
there is an object between the remote control and the signal remote control sensor window on
the display, the remote may not operate.
When using the remote control, please note:
• Do not strike or drop the remote. Do not expose the remote control to liquids and do not place it
in humid environments.
• Do not install or place the remote control in direct sunlight. The heat may damage the remote
control.
• If the remote control sensor window on the display is in direct sunlight or strong light, the
remote control may not operate normally. In this situation, change the light source or readjust
the angle of your display, or operate the remote control from a location closer to the remote
control sensor window on the display.
Batteries
You will need to install the supplied batteries into the remote control to make it operate
following the instructions below.
Notes on Using Batteries
The use of the wrong type of batteries may cause chemical leaks and/or explosion. Please note
the following:
• Always ensure that the batteries are inserted with the positive and negative terminals in the
correct direction as shown in the ba ttery compartment.
• Different types of batteries have different charac teristics. Do not mix different types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life and/or
cause chemical leaks from the old batteries.
• When batteries fail to function, replace them immediately.
• Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps out
of the batteries, wipe it up immediately using a dry cloth.
• Due to varying storage conditions, the battery life for the batteries included with your display
may be shortened. If the remote control is not used for a long period of time, remove the
batteries.
1. Open the lid of the remote control battery compartment.
2. Insert two size-AAA batteries (included).
Ensure that the batteries are inserted with the positive and
negative terminals in the correct direction corresponding to the
(+) and (-) marks in the battery compartment.
3. Install the lid of the remote control battery compartment.
Downloaded From TV-Manual.com Manuals