4.Disconnect the lamp connector from the projector.
5.Loosen the screw that secures the lamp.
6.Pull the lamp from the projector.
• Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector.
•Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials.
•Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images.
7.As shown in the figure, hold the new lamp and align the two locators on the lamp with the holes on the projector, and then insert the lamp all the way into the projector.
8.Connect the lamp connector to the projector.
Maintenance 39
