6.Press 
to select a menu item to be changed and adjust the value with 
/ 
. See
7.When all settings have been done, highlight Save Settings and press Mode/Enter to store the settings.
8.The confirmation message “Setting Saved” displays.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some
functions by highlighting them and pressing 
/ 
on the projector or remote control.
Adjusting Brightness
The higher the value, the brighter the image. And the lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as 
+50+70
+30
black and that detail in the dark areas is visible.
Adjusting Contrast |
|
|
| |
The higher the value, the greater the contrast. Use this |
|
|
| |
to set the peak white level after you have previously |
|
|
| |
adjusted the Brightness setting to suit your selected | +30 | +50 | +70 | |
input and viewing environment. | ||||
|
|
|
Adjusting Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic.
Adjusting Tint
The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the picture becomes.
Adjusting Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the picture becomes.
