Using the TV macro
The TV macro feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a DVD, you would normally turn on the component, select DVD as the input source, and press the play button to start playback. The TV macro feature lets you perform all of these operations simply by pressing the DVD macro button.
Notes
•Be sure to set up a remote control code for your TV before setting macros.
•The ways to set macros differ if your TV does not have the tuning capability.
•If you press any control buttons on the remote control other than the ones used to set macros while setting macros, the setting procedure is automatically canceled.
•If it takes more than 10 seconds in steps 2 and 3, the setting procedure is automatically canceled. In this case, repeat from step 1.
STANDBY/ON | POWER POWER |
AV TV
STB VCR DVD AUX
TV
INPUT1 INPUT2 MACRO
TV
AUTO
VOL MODE SETUP INPUTMODE SLEEP
5BEAM ST+3BEAM 3BEAM
1 2 3
STEREO MY BEAM MY SUR.
4 5 6
7 8 9
SUR. DECODE
0 +10
CH LEVEL | MENU |
TV/AV
ENTER
YSP
TESTRETURN
VOLUME | CH | TV VOL |
MUTE | TV INPUT | TV MUTE |
|
| CODE SET |
Remote control features
■Setting macros for the TV with the tuning capability
1Press and hold CODE SET and press one of the input selector buttons to select the input source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE
While holding | STB | VCR | DVD | AUX | |
down, press | |||||
|
|
|
|
CODE SET
2Press MACRO while holding down CODE SET.
TV MUTE | While holding | MACRO |
|
| |
| down, press |
|
CODE SET |
|
|
3Press CH +/– or the numeric buttons to select the TV channel.
Check that the TV screen changes to the tuner screen.
CH | 5BEAM | ST+3BEAM | 3BEAM |
| 1 | 2 | 3 |
| STEREO | MY BEAM | MY SUR. |
or | 4 | 5 | 6 |
7 8 9
0 +10
4Press TV INPUT repeatedly until the screen changes to the display of the input source selected in step 1.
TV INPUT
5Press ENTER to confirm the macro setting.
ENTER
OPERATION | ADVANCED |
|
|
English
