![](/images/new-backgrounds/1256027/256027177x1.webp)
Troubleshooting
■ Remote control
Problem | Cause | Remedy | See | |
page | ||||
|
|
| ||
|
|
|
| |
The remote control does not | Wrong distance or angle. | The remote control functions within a | 26 | |
work and/or function |
| maximum range of 6 m (20 ft) and no more |
| |
properly. |
| than 30 degrees |
| |
|
| panel. |
| |
|
|
|
| |
| Direct sunlight or lighting (from an inverter | Reposition this unit. | — | |
| type of fluorescent lamp, etc.) is striking the |
|
| |
| remote control sensor of this unit. |
|
| |
|
|
|
| |
| The batteries are weak. | Replace all batteries. | 26 | |
|
|
|
| |
Cannot operate external | The external component you want to operate | Press INPUT on the front panel or the input | 41 | |
components with the remote | is not selected as the input source. | selector buttons on the remote control to |
| |
control of this unit. |
| select the external component you want to |
| |
|
| operate. |
| |
|
|
|
| |
| The remote control code was not correctly | Set the remote control code correctly or try | 79 | |
| set. | another code for the same manufacturer |
| |
|
| using the “List of remote control codes” at |
| |
|
| the end of this manual. |
| |
|
|
|
| |
| Even if the remote control code is correctly | Use the remote control supplied with the | — | |
| set, there are some models that do not | external component. |
| |
| respond to the remote control. |
|
| |
|
|
|
| |
The cursor buttons do not | The operation mode selector was | Set the operation mode selector to YSP. | — | |
work during SET MENU | unwantedly set to TV/AV. |
|
| |
operation. |
|
|
| |
|
|
|
| |
Cannot use the My Beam | Wrong distance or angle. | The remote control functions within a | 51 | |
| maximum range of 6 m (20 ft) and no more |
| ||
|
| than 30 degrees |
| |
|
| panel. |
| |
|
|
|
|
INFORMATION | ADDITIONAL |
|
|
|
|
English |
|
|
|