Center line
AUTO SETUP (IntelliBeam)
Using AUTO SETUP (IntelliBeam)
Once the IntelliBeam microphone is firmly connected to this unit and properly placed in your listening room, follow the procedure below to start the AUTO SETUP procedure.
You can also enter the AUTO SETUP procedure simply by pressing and holding AUTO SETUP for more than two seconds. In this case, this unit performs both of the beam optimization and sound optimization procedures.
IntelliBeam microphone
■Assembling the supplied cardboard
microphone stand | INPUT VOLUMESTANDBY/ON |
You will find three separate parts (one circular part and two longitudinal parts) of the cardboard microphone stand originally put together.
12
34
1Disassemble the three parts of the cardboard microphone stand originally put together.
2Insert one of the longitudinal part into the crevice of the other longitudinal part.
3Place the circular part on top of the two combined longitudinal parts.
4Place the supplied IntelliBeam microphone on top of the circular part.
STANDBY/ON | POWER POWER |
AV TV
STB VCR DVD AUX
TV
INPUT1 INPUT2 MACRO
TV
AUTO
VOL MODE SETUP INPUTMODE SLEEP
5BEAM ST+3BEAM 3BEAM
1 2 3
STEREO MY BEAM MY SUR.
4 5 6
7 8 9
SUR. DECODE
0 +10
CH LEVEL | MENU |
TV/AV
ENTER
YSP
TESTRETURN
VOLUME | CH | TV VOL |
SETUP
English
