![](/images/new-backgrounds/1256027/256027137x1.webp)
Adjusting the audio balance
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more
Using the test tone
You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use this to set the channel levels so that the volume level of each channel is identical when heard from your listening position.
CH LEVEL | MENU |
TV/AV
ENTER
YSP
TESTRETURN
1Set the operation mode selector to YSP.
TV/AV
YSP
2Press TEST.
“TEST LEFT” appears in the front panel display and a test tone is output from the front left channel.
3Press /
to select the channel you want to adjust.
The front panel display changes as follows:
TEST FRONT L
ENTER
TEST CENTER
TEST FRONT R
TEST SUR.R
TEST SUR.L
TEST SUBWOOFER
Note
“TEST SUBWOOFER” is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 62).
4Press /
to adjust the channel volume.
TEST
ENTER
Control range:
T E S T X L E F T
OPERATION | ADVANCED |
|
|
English