![](/images/new-backgrounds/1256027/256027139x1.webp)
Adjusting the audio balance
5 Press TEST when you have completed all | 1 Set the operation mode selector to YSP. |
your adjustments. |
|
| TV/AV |
TEST | YSP |
Notes
•All channel levels cannot be adjusted when the stereo playback (see page 50), My Beam (see page 51), or My Surround (see page 45) is selected as the beam mode.
•“FRONT L/R” cannot be adjusted when Stereo plus 3 Beam is selected as the beam mode (see page 45).
•“FRONT L/R” are automatically adjusted depending on the settings of the other channels when Stereo plus 3 Beam or stereo playback is selected as the beam mode (see pages 45 and 50).
y
If the level of a particular channel cannot be adjusted, “–
2Press CH LEVEL repeatedly (or press
CH LEVEL and /
) to select the channel you want to adjust.
The front panel display changes as follows.
CH LEVEL
or
CH LEVEL
ENTER
Using the audio output being played back
You can also manually adjust the channel levels while playing back an input source such as a DVD.
CH LEVEL | MENU |
TV/AV
ENTER
YSP
TESTRETURN
FRONT L +1.0dB
CENTER
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR
Note
“SWFR” is available only when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 62).