Safety Instructions (Continued)
13.Do not place this projector in any of the 14. Do not block the ventilation holes.
following environments. | - Do not place this projector on a blanket, | |
- Space that is poorly ventilated or | bedding or any other soft surface. | |
- Do not cover this projector with a cloth | ||
confined. Allow at least 50 cm clearance | ||
from walls and free flow of air around | or any other item. | |
the projector. | - Do not place inflammables near the | |
- Locations where temperatures may | projector. | |
become excessively high, such as the |
| |
inside of a car with all windows rolled |
| |
up. |
|
- Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the projector's life span and darken the image.
If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire.
15. Always place the projector on a level, horizontal surface during operation.
| - Do not use if tilted at an angle of more | |
- Locations near fire alarms | than 10 degrees left to right, nor at angle | |
- Locations with an ambient temperature | of more than 15 degrees front to back. | |
Using the projector when it is not fully | ||
above 40°C / 104°F | ||
horizontal may cause a malfunction of, | ||
- Locations where the altitudes are higher | ||
or damage to, the lamp. | ||
than 3000 m (10000 feet). |
|
3000 m
(10000 feet)
16. | Do not stand the projector on end | |||
0 m | vertically. Doing so may cause the | |||
projector to fall over, causing injury or | ||||
(0 feet) |
|
| ||
| ||||
|
|
| resulting in damage to the projector. | |
Important safety instructions | 5 |
