BenQ MX520 Display menu Picture menu Function, Teaching, Template, Picture Mode, Reference, Color

1. DISPLAY menu

2. PICTURE menu

Function Description

Teaching	See "Using the teaching templates" on page 34 for details.
Template

Picture Mode	Pre-defined picture modes are provided so you can optimize your
	projector image set-up to suit your program type. See "Selecting a
	picture mode" on page 27 for details.
Reference	Selects a picture mode that best suits your need for the image quality
	and further fine-tune the image based on the selections listed on the
Mode	same page below. See "Setting the User 1/User 2 mode" on page 27
	for details.
Brightness	Adjusts the brightness of the image. See "Adjusting Brightness" on
	page 28 for details.
Contrast	Adjusts the degree of difference between dark and light in the image.
	See "Adjusting Contrast" on page 28 for details.
	Adjusts the color saturation level -- the amount of each color in a
Color	video image. See "Adjusting Color" on page 28 for details.
	This function is only available when a Video, S-Video or Component Video
	signal is selected.
	Adjusts the red and green color tones of the image. See "Adjusting
Tint	Tint" on page 28 for details.
	This function is only available when a Video or S-Video signal is selected and
	the system format is NTSC.
	Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness	Sharpness" on page 28 for details.
	This function is only available when a Video, S-Video or Component Video
	signal is selected.
Brilliant Color	See "Adjusting Brilliant Color" on page 28 for details.
Color	See "Selecting a color temperature" on page 28 for details.
Temperature
Color
Temperature	See "Setting a preferred color temperature" on page 29 for details.
Fine Tuning
3D Color	See "3D Color Management" on page 29 for details.
Management
Reset Picture	See "Resetting current or all picture modes" on page 30 for details.
Setting

40 Operation