BenQ mx618st, ms616st user manual Controls and functions, Projector

Controls and functions

Projector

	1
	2		9
			10
	3		11
			12
	4
			13
	5		14
	6		15
	7
			16
	8
1.	Focus ring	11.	LAMP indicator light

	Adjusts the focus of the projected image.		Indicates the status of the lamp. Lights up
2.	Zoom ring		or flashes when the lamp has developed a
	Adjusts the size of the image.		problem.
		12.	AUTO
3.	Top IR remote sensor
4.	MENU/EXIT		Automatically determines the best picture
	Turns on the On-Screen Display (OSD)		timings for the displayed image.
	menu. Goes back to previous OSD menu, 13.		Keystone/Arrow keys ( / Up,	/
	exits and saves menu settings.		Down)

5. POWER

Toggles the projector between standby mode and on.

6. Left/

Decreases the projector volume.

7.MODE/ENTER

Selects an available picture setup mode.

Activates the selected On-Screen Display (OSD) menu item.

8.ECO BLANK

Used to hide the screen picture.

9.POWER indicator light

Lights up or flashes when the projector is under operation.

10.TEMPerature warning light

Lights up red if the projector's temperature becomes too high.

Manually corrects distorted images resulting from an angled projection.

14. Right/

Increases the projector volume.

When the On-Screen Display (OSD) menu is activated, the #6, #13, and #14 keys are used as directional arrows to select the desired menu items and to make adjustments.

15.SOURCE

Displays the source selection bar.

10 Introduction