BenQ SH910 user manual Remote control, Up/Down, Network Setting, Test, Off

Remote control

1	14
2	15
3	16
4	17
5	18
6
7
8	19
19
7
9	20
10	21
11	22
12	23
	24
13	25

1.ON

Turns on the projector. See "Starting up the projector" on page 22 for details.

2.COMPUTER

Displays RGB (PC)/Component video (YPbPr/ YCbCr) signal.

3.HDMI

Displays HDMI signal.

4.S-VIDEO

Displays S-video signal.

5.MENU/EXIT

Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings. See "Using the menus" on page 25 for details.

6.BLANK

Used to hide the screen picture. See "Hiding the image" on page 34 for details.

7.Keystone/Arrow keys ( / Up, /

Down)

Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 24 for details.

8.MODE/ENTER

Selects an available picture setup

mode. See "Selecting a picture mode" on page 31 for details.

Activates the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 25 for details.

9.ZOOM+/ZOOM-

Magnifies or reduces the projected picture size. See "Magnifying and searching for details" on page 29 for details.

10.Page Up/Down

Page up/down arrows when connected through USB to a PC. See "Remote paging operations" on page 34 for details.

11.FREEZE

Freezes the projected image. See "Freezing the image" on page 34 for details.

12.Network Setting

Enables Network Settings OSD menu.

13.TEST

Displays the test pattern. See "Test Pattern" on page 70 for details.

14.OFF

Turns off the projector. See "Shutting down the projector" on page 38 for details.

15.VIDEO

Displays vidoe signal.

16.NETWORK

Enables the network mode.

17.SOURCE

Displays the source selection bar. See "Switching input signal" on page 28 for details.

12 Introduction