5. SYSTEM SETUP: Advanced menu
FUNCTION | DESCRIPTION |
Baud Rate | Selects a baud rate that is identical with your computer’s so that you |
can connect the projector using a suitable | |
| is intended for qualified service personnel. |
|
|
Test Pattern | Selecting On enables the function and the projector displays the grid |
test pattern. It helps you adjust the image size and focus and check that | |
| the projected image is free from distortion. |
|
|
| Closed Caption Enable |
| Activates the function by selecting On when the selected input signal |
| carries closed captions. |
| • Captions: An |
Closed | sound effects of TV programs and videos that are closed captioned |
(usually marked as "CC" in TV listings). | |
Caption | Set your screen aspect ratio to 4:3. This function is not available |
| when the aspect ratio is “16:9”, “16:10” or “Real”. |
| Caption Version |
| Selects a preferred closed captioning mode. To view captions, select |
| CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary |
| language in your area). |
|
|
| Network |
| Selecting On enables the function, and the projector can be monitored |
| or controlled over a network when it is in standby mode. |
| Microphone |
| Selecting On enables the function, and the microphone can be used |
| even in standby mode |
Standby | Monitor Out |
Settings | Selecting On enables the function. The projector can output a VGA |
| signal when it is in standby mode and the COMPUTER and |
| MONITOR OUT jacks are correctly connected to devices. |
| Enabling this function slightly increases the standby power |
| consumption. |
| Audio Pass Through |
| Sets audio input source when the projector is in standby mode. |
|
|
