BenQ SH910 Turning off the Power on/off ring tone, Adjusting the microphone’s sound level

To adjust the sound level, press VOLUME +/

VOLUME-on the remote control, or:

1. Repeat steps 1-2 above.

2. Highlight Volume and select a desired sound level.

Turning off the Power on/off ring tone

To turn off the ring tone:

1.Repeat steps 1-2 in Muting the sound section.

2.Highlight Power on/off Ring Tone and select Off.

The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power on/off ring tone.

Adjusting the microphone’s sound level

To adjust the sound level, press MIC/VOL +/- on the remote control, or

1. Repeat steps 1-2 in Muting the sound section.

2.Highlight Microphone volumee and select a desired

sound level.

Microphone sound will still function even though Mute is activated.

Turning on/off the SRS

•Using the OSD menu

1.Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced menu is highlighted.

2.Press to highlight Audio Settings and press MODE/ENTER. The Audio Settings page displays.

3.Highlight SRS and press / to select On/Off.

36 Operation