Best IP29M Series Select Blower Option And Installation Type, MODEL EB6, EB9, EB12 OR EB15

1. SELECT BLOWER OPTION AND INSTALLATION TYPE

Either an interior or an exterior blower or in-line blower may be used with this hood. The Best by Broan IP29M Series must be installed with blower models P6, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only. Other blowers cannot be substituted.

(Blowers sold separately.)

Plan where and how the ductwork will be installed.

If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 9, 11 to 15, 17 and up of this manual.

Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use metal duct tape to seal duct joints.

ROOF CAP

7” (178) ROUND DUCT

ROOF CAP

10” (254) ROUND DUCT

DECORATIVE FLUE

12”, 18”, 24” or 30” (762, 305, 457 or 610) or TRIM

HOOD

30” TO 36” (762 to 914)

ABOVE COOKING SURFACE

HH0080A NOTE: Dimensions in ( ) are in mm.

DECORATIVE

FLUE

12”, 18”, 24” or 30”

(762, 305, 457 or 610)

or TRIM

HOOD

30” TO 36” (762 to 914)

ABOVE COOKING SURFACE

HH0081A NOTE: Dimensions in ( ) are in mm

ROUND TRANSITION 4½” x 18½” to 10”

(114 x 470 to 254)

(see page 3)

MODEL P6 SINGLE INTERIOR BLOWER

TYPICAL DUCTWORK

EXTERIOR

BLOWER

10” (254)

ROUND DUCT

DECORATIVE FLUE

12”, 18”, 24” or 30” (762, 305, 457 or 610) or TRIM

	HOOD
	30” TO 36” (762 to 914)
	ABOVE COOKING SURFACE
HH0082A	NOTE: Dimensions in ( ) are in mm

MODEL EB6, EB9, EB12 OR EB15

EXTERIOR BLOWER TYPICAL DUCTWORK

MODEL P12 DUAL INTERIOR BLOWER

TYPICAL DUCTWORK

ROOF CAP

10” [254] ROUND DUCT (except ILB3, 8’’ [203] ROUND DUCT)

IN-LINE BLOWER

DECORATIVE	WALL
FLUE
	CAP
12”, 18”, 24” or 30”
(762, 305, 457 or 610)
or TRIM
	HOOD

30” TO 36” [762 to 914]

ABOVE COOKING SURFACE

HH0083A NOTE: Dimensions in ( ) are in mm.

MODEL ILB3, ILB6, ILB9 OR ILB11

IN-LINE BLOWER TYPICAL DUCTWORK

- 5 -